| Albany Oregon |
| 541.619.8335 |
- There are 48 super bright LEDs per circuit board. One board for park/stop light
and one board for the turn signal on each side of the car. - Available for positive or negative ground cars.
- Turn Signal circuit boards are available with red or amber LEDs.
- The circuit boards are reverse voltage and over voltage protected. The LEDs are
rated for 10 years continuous use. - The LED array uses about 80% to 85% less current then the standard tail light
bulb (#1156, #1157). - The LED circuit boards plugs directly into the existing wiring harness including the
ground wire. This eliminates problems with poor ground connections through the
standard bulb socket. - An updated turn signal flasher is usually required to allow LED turn signals to work
properly. Click here for more information. - These units do not require any modifications to the car other than removing the
existing wires from the tail light housing and installing the new units. Save the
original wiring if you want to return the tail lights to the original configuration.
| LED Tail Lights Set (Negative Ground) $227.00 + $8.00 Shipping In US |
| LED Tail Lights Set (Positive Ground) $227.00 + $8.00 Shipping In US |
| Jaguar XKE Series 1 & 1.5 LED Tail Light Set |